. Getting started
.. Safety instructions
Protect the device and all other devices connected to it from
dampness, water drops or water spray. To prevent malfunc-
tions, keep the device dust-free, away from sources of heat,
and out of direct sunlight.
Do not place any objects on the cables as they may be dam-
aged.
Ensure that there is adequate ventilation around the device.
The back panel must be located at least cm away from walls
or other objects and both sides of the device must be at least
cm away.
Do not cover the device (with newspapers, covers etc.) to pre-
vent overheating.
Do not place open flames such as lit candles on or near the
device.
Keep the device at a distance of at least one metre from
sources of high-frequency or magnetic interference (televi-
sions, other loudspeakers, mobile telephones etc.) to avoid
malfunctions.
The device can be operated at an ambient temperature of
+°C to +°C.
Never use the device anywhere that is damp or wet.
When switched off, the device can be stored at temperatures
of between °C and +°C.
Major changes in temperature or fluctuations in humidity can
cause moisture to build up within the device due to condensa-
tion – this can cause an electrical short circuit.
After transporting the device, wait until it has reached ambi-
ent temperature before switching it on.
DE
FR
NL
ES
IT
EN