Idiomas disponibles
Idiomas disponibles
Instal lation
G U ide
continued
e This unit can be connected to an optional CD changer (CX-DP600EUC or CX-DP1200EUC). For details
consult your nearest Panasonic dealers.
e For connection to a CD changer, refer to the operating instructions of the CD Changer (CX-DP600EUC or
CX-DP1200EUC).
e Fader Control does not affect the output of the amplifier connected to this unit's preout cord.
Caution:
e To prevent damage to the unit, be sure to follow the connection diagram below.
e Be sure to connect the ground lead (black) to the car chassis first before connecting the other leads to the speci-
fied wires of the car.
e Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and
keep cable terminals free from touching any metal parts.
CX-DP600EUC
Extension Cord (DIN/BATT/RCA)
<Back Side>
Insert the ground lead into
N
the notch of the chassis.
Ground lead
(To a clean, bare metallic
(Yellow)
part of your vehicle.)
Be sure to connect to a well grounded metallic
part of your car because noises or troubles
may occur.
Fuse (3A)
Battery Cord
To a constant power supply
Gray
Gray
Preamp out
cord
É
Red
Red
CQ-E15EUC
RCA Extension Cord
PRE-OUT
CD Changer
ANTENNA
control connector
f
rl
CY-M302EU/EC
BATTERY LEAD
(Connect to car battery)
Je Je POWER
(+12V DC, negative
ground only )
|
GROUND
mr
(Connect to a clean,
bare metallic part of
your vehicle)
SPEAKER LEAD
=
E
Amp Relay Control Lead
O]
Gray w/Black Stripe
C
Blue w/White Stripe
Stripe
REAR SP
Violet w/Black Stripe
MOTOR ANTENNA
RELAY CONTROL
(moves antenna up
and down)
=
Violet
Gray
Green w/Black
Stripe
O
(+)
O
(+
Ch)
LEFT SPEAKER
RIGHT SPEAKER
LEFT SPEAKER
RIGHT SPEAKER
(FRONT)
(FRONT)
(REAR)
(REAR)
di
CQ-E15EUC
