F2 Auxilliary Function - Fermax iLoft VDS Manual De Instalador Y Usuario

iLoft VDS iLoft VDS

F2 auxilliary function

The F2 key and F2 connection allow you to confi gure
the operating mode.
Initially it is confi gured, by default, as an output for F2
when the F2 key is pressed.
However, you can confi gure the Lift Control option,
giving an output to the F2 connection when sending the
Lock-Release, either for the time the lock-release button
is being pressed in call or conversation mode or while
the doormatic automatically sends the lock-release command. If you press the F2 button,
no action occurs.
F2 output mode
Resetting the Parameters
You have the option to reset the parameters to default
values by selecting the option on the installation menu
and confi rming the operation.
This reset does not change the programmed terminal´s
number.
The parameters changed are:
- Selected melody for the main panel. Ding-Dong-Dang.
- Selected melody for the secondary panel. Bitonal
Fermax.
- Selected melody for the doorbell. Ding-Dong.
- Call tone volume medium. Call volume
- Conversation volume. Medium conversation volume
- Image adjustments (brightness, contrast and colour).
Start-up adjustments.
- Do not disturb deactivated
- F1 connection operations. Panic OFF.
- F2 connection operations. Lift Control OFF.
- Doormatic. Disabled.
Pag 12
you can select the lift control
mode by pressing the right arrow
lift control mode
the left arrow disables the lift
control mode
Cancel: Accept