Fermax iLoft VDS Manual De Instalador Y Usuario página 32

iLoft VDS iLoft VDS
2. When in the User menu, enter in ADMINISTRATOR menu (pressing F1 + F2 simultaneously
for 5 seconds). Once in the ADMINISTRATOR menu, select the fi rst option.
2
¸
5"
a
b
a) Hundreds: Press the
b) Tens: Press the
c) Single unit: Press the
4º. Exit Programming: Press the «OK» to confi rm the selected number. You return to the
previous programming menu.
Pag 8
Select the fi rst option:
F1 F2
+
The fi rst thing the monitor then does is indicate the
number of the current monitor on the SCREEN. If it is not
programmed, it will show the following: - - -
Note: When the terminal has not been programmed the
blue led will fl ash very slowly.
3º. Programme the call number: Each time the button
corresponding to hundreds, tens or single units is
pressed, the fi gure goes up that fi gure and is shown
on the DISPLAY.
c
button
button
button
Administrator Menu
The icons viewed on-screen are controlled
via the corresponding buttons on the monitor.
Once you reach 9, if you press it again,
it returns to 0. The next time you press, it
will start at 1.