Idiomas disponibles
Idiomas disponibles
1. Place the power tool on a level and dry surface. Make
sure the ventilation slots are unclogged;
2. Attach the heating sockets (8 to 13) according to the
required size;
3. Clean the heating sockets with an alcohol-soaked cloth;
4. Cut the pipe with the supplied pipe cutter in order to
avoid burrs;
You can also use a hand saw and a try square to cut
and consequently remove all burrs before welding.
5. Clean the pipe and the fitting with an alcohol-soaked
cloth;
6. Mark the insertion depth on the pipe so that the tip of the
pipe does not go over the end of the fitting;
7. Plug in the power cord and use the temperature control
knob (7) to set the desired temperature;
8. After reaching the desired temperature, simultaneously
fix the pipe and the fitting into the respective heating
sockets;
9. The fitting must cover the entire surface of the heating
socket, while the pipe must not exceed the mark
previously made;
10. Remove the pipe and the fitting at the end of the fusion
time according to the table below;
11. After removing the pipe and the fitting from the pipe
welding machine, immediately join the tip of the pipe
into the fitting;
12. After joining, hold it firmly and let it cool for 20 to 30
seconds, taking 3 initial seconds to adjust the angle to
15°;
Do not rotate the tube.
13. After finishing the pipe welding, switch off the pipe
welding machine, unplug the power cord and let it cool
down.
Heating
socket
Heating time
diameter (mm)
(s)
20
25
32
40
50
63
Insertion
depth (mm)
4
14
5
16
9
19
9
20
10
21
30
26
Whenever any repair or change of accessories is required,
the power cord must be unplugged and the appliance left
to cool down.
Regular maintenance ensures that the appliance operates
normally and in accordance with safety precautions.
Regular checks should be carried out, particularly on the
temperature control knob, earthing, power cord and other
connections.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste (WEEE) and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp:
+351 967 817 569
E-mail:
