Tineco PURE ONE X Serie Manual De Uso página 26

Dustbin and Mesh Filter
1.Press the dustbin release button to remove the
dustbin.
Fig.E-1
2.Clean with a damp cloth, taking care to prevent
water entering the appliance main body and
battery.
Fig.E-2
3.Turn counter-clockwise to remove the filters.
Fig.E-3
4.Clean the dustbin and mesh filter with a damp
cloth. Air dry completely before reinstalling.
Fig.E-4
5.After cleaning, insert the clean pre-filter into
the mesh filter properly and it clicks into place.
Install the clean filter and dustbin back into the
main body, then close the dustbin flap.
Fig.E-5
Warning:
• Do not wash the dustbin as it contains a dust
sensor. If it comes into contact with water,
please dry it with a hair dryer.
Fig.E-6
Pre-filter
1.Ensure the appliance is switched off before
cleaning, and remove the dirty pre-filter from
the mesh filter-holder.
Fig.E-7
2.Do not turn the appliance upside down when
removing or installing the filter to prevent dust
from entering the motor.
Fig.E-8
3.Replace a clean filter to the main body. Put
the dirty pre-filter into the cleaning tool and
connect the cleaning tool to the main body.
Fig.E-9
4.Run the appliance in MAX mode, and rotate
the side cover to clean the dirty pre-filter.
Fig.E-10
HEPA Filter
1.Turn the HEPA to the left and gently pull out
for cleaning. Do not use the appliance without
first installing the HEPA filter.
Fig.E-11
2.Do not place the appliance as above when
removing or installing the HEPA filter, to
prevent dust from entering the motor.
Fig.E-12
3.The HEPA filter can be washed under running
water and must be completely dry before
reinstalling.
Fig.E-13
* The HEPA is detachable. Simply rotate to
remove and replace.
Fig.E-14
Dust Sensor
• To avoid dust accumulation which can affect
cleaning performance, wipe the suction mouth
with a damp cloth.
Fig.E-15
Mini Power Brush
1.Press against the roller end cover downward.
Fig.E-16
2.Pull out the brush roller.
Fig.E-17
3.Remove the debris wrapped around the roller
with the Tineco Hair Cleaning Tool.
Fig.E-18
4.Fully reinsert the brush roller at an angle and
push upward until it clicks securely back into
place.
Fig.E-19
Brush Roller
1.Use a coin or other tool, to unlock the brush
roller lock, then remove the brush from the
brush window.
Fig.E-20
2.Remove the debris wrapped around the roller
with the Tineco Hair Cleaning Tool.
Fig.E-21
3.Gently clean the transparent brush window.
Fig.E-22
4.After cleaning, reinstall the brush.
Fig.E-23
Warning:
The power brush contains electrical components
which must not be soaked or washed with water.
24