Tineco PURE ONE X Serie Manual De Uso página 25

Emptying the Dustbin
1.Press the release button on the side of the
dustbin to empty the contents.
Fig.D-8
2.Close and click the dustbin flap back into
place.
Fig.D-9
Charging the Battery
• Place the main body on the dock, plug in the
adaptor and charging port. The main body
indicator blinking blue indicates that it is
charging correctly.
Fig.D-10
Fig.D-11
Warning:
• Only use the Tineco-provided adapter to
charge the appliance.
• During long periods of not being used, store
the appliance in a cool, dry place. Ensure the
battery is fully charged every 3 months.
• Do not expose appliance to sunlight or freezing
temperature. Recommended temperature
range: 39.2°F (4°C)~104°F (40°C).
Runtime
• When in AUTO mode, the runtime is
approximately 70 minutes with non-motorised
brush and 45 minutes with motorised brush.
When MAX power is used, the runtime is
approximately 12 minutes.
• Estimated runtime data was obtained by a
Tineco Laboratory using one battery and non-
motorized accessories.
Charging Time
• A full charge takes approximately 3-4 hours.
• Estimated data was obtained by a Tineco
Laboratory using ambient temperatures
between 39.2°F (4°C) to 104°F (40°C).
Indicator
When in Use
Slowly blinking red light for 6s:
low power.
Rapidly blinking red light: see
troubleshooting.
Connect to Network
Blinking blue light: connecting
to the network.
Solid blue light: successfully
connected.
During Charging
Breathing blue light: charging.
Fully Charged
In 5 minutes: solid blue light.
After 5 minutes: light off.
MAINTENANCE
Note:
• Clean the dustbin and filters after each use.
• Use the cleaning tool to thoroughly clean
the pre-filter when the indicator blinking red
rapidly. To maintain high performance, wash
and dry the pre-filter monthly, replacing it every
6 months. Wash and dry the HEPA filter every
3 months, replacing it every 12 months.
23