Beko BHCA66641BBHS Manual Del Usuario página 14

4 First Use
Before you start using your product, it is re-
commended to do the following stated in
the following sections respectively.
4.1 Initial Cleaning
1. Remove all packaging materials.
5 Using the Hood
The hood has an engine with various
speeds. For a good performance, we re-
commend using low speeds under normal
conditions and high speeds in case of
strong odour and vapour condensation.
The program is cancelled if power
is cut when any program in your
hood is active.
MODEL A
1 Lamp key
2 On-Off/Speed 1 key
3 Speed 2 key
4 Speed 3 key
MODEL B
1 Lamp key
2 On-Off/Speed 1 key
3 Speed 2 key
4 Speed 3 key
5 Booster key
2. Wipe the surfaces of the product with a
wet cloth or sponge and dry with a cloth.
NOTICE: Some detergents or cleaning
agents may cause damage to the surface.
Do not use abrasive detergents, cleaning
powders, cleaning creams or sharp objects
during cleaning.
MODEL C
1 Automatic mode key
2 On-Off/Speed 1 key
3 Speed 2 key
4 Speed 3 key
5 Booster key
6 Lamp key
Operating the hood
1. Touch the speed level key you have se-
lected to operate the hood.
ð The set speed level key lights up.
2. You can touch the other speed level
keys to change the speed level.
When in operation, the product will
run for a maximum of 6 hours if no
key is touched.
Turning off the hood
1. To turn the hood off, touch again the key
of the level on which the hood is operat-
ing or key.
If you touch the
function active except the lamp,
then the function is cancelled.
EN / 14
EN
DE
PL
ES
key with any