PRIXTON KR210 Manual Del Usuario página 12

IMPORTANT:
1) the appliance must be used together with the bowl, IF YOU USE APPLIANCE WITHOUT
THE BLENDER,THE APPLIANCE WILL NOT FUNCTION IF THE HOUSING CAP HAS NOT
BEEN SCREWED ONTO THE ATTACHING HOLE FOR THE BLENDER:
2) Before use : do not put he main plug in the socket until you have attached the blender jar
and the housing cap in the correct way.
3) After use: unplug the appliance before you remove the blender jar from the housing.
4) Do not fill the blender jar with ingredients that are hotter than 80C.
5) To prevent spilling, do not put more than 1.5 liters of liquid in the blen-der jar.
6) Never remover the lid while the blender is running.
7) Notice: Always remove the lid from the blender jar before mounting and dismounting
the blender jar.
8) Do not operate the blender attachment over 3 minutes.
9) The blender can be used for pureeing very finely and for blending. it can be used for e.g.
soups, sauces, milk shakes, baby food, vegetable, fruit the batter, puree, etc. if necessary cut
solid ingredients into smaller pieces before you put them in the blender.
-Remove the housing cap,(Fig 1)
-Place the foodstuff you wish to process into the plastic jar
-Press the lid into place and it is firmly fixed,(Fig 2)
-Place the blender stopper into the hole in the lid and turn clockwise to lock (Fig3)
-Mount the blender jar onto the attaching hole and turn it clockwise until it is firmly
fixed.(Fig4)
-Assemble the bowl by twisting. the bowl until to its fixture in clockwise direction.
-Set the speed control to position 6.
Tips:
1) The opening in the lid can be use to add ingredients while the appliance is running to do
so. remove the stopper from the lid.
2) It may be necessary to switch off the appliance from time to time to remove pieces of
food slicking to the inside of the blender jar.
-Switch off the appliance and unplug it .
-Remove the stopper and the lid
-Remove pieces slicking to the inside of the blender jar with a soft spatula.
Keep the spatula at a safe distance from the knives
-Turn the blender jar anti-clockwise.Take out the blender jar (Fig 5)
-Turn the blender stopper an-clockwise .(Fig6)
FIG 1
FIG 4
FIG 2
FIG 5
12
FIG 3
FIG 6