Idiomas disponibles
Idiomas disponibles
EN
6. Do not overload the mower during the cut. Otherwise, the mower or the battery could be damaged. Do not cut more than 28mm
on live plants or more than 20mm on dry branches.
7. User should release the trigger when the blade gets stuck with branches. The leaf will return to the maximum open position.
Caution: Do not swing the trimmer from left to right so as not to damage the edge of the blade during the resumption
process.
8. Changing the opening position of the blade: You can adjust the opening size of the blade by pressing the black button on the
scissors. You can identify the length by the sound that is emitted when you press it. If the sound is long, the slice size is large;
while if it is short the size is small. Please see below:
When the blade is in the fully open position, hold down the trigger for 5 seconds so that the blade stays closed. If you release the
trigger and press it 2 times continuously, the blade will open with a small size. Follow the same procedure to change the size from
small to large. You can adjust it counts times you want.
9. When you are going to stop working, press and hold the trigger for 5 seconds so that the blade stays closed. Turn off the switch
and remove the battery cable.
12. cutting strategy
1. The tool is operated with one hand, so the other must be at least 15cm from the work area. You must not approach anyone.
2. The blade will be damaged or jammed if it is forced to cut large branches.
3. Do not move the scissors during cutting, as it is dangerous.
4. Use the sleeve to fix the device cable so that it cannot be pulled by a branch, which would create a hazardous situation.
5. Do not use the device in rain or excessive humidity.
6. When storing the equipment after use, remove the battery cable and mower cable beforehand, and turn off the power switch.
Caution: Please check the battery capacity and whether the blade is sharp in case the cutting is not
smooth and easy.
13. maintenance and cleaning
1. Maintenance
Take the equipment to the technical service in case it needs to be repaired. Use original parts to maintain
the good condition and safety of the tool.
Please turn off the battery if you need to check the pruning shears.
Put on gloves to check if the blade is sharp in order to avoid damage. Always check the pruning shears
when applicable. In this way, you will maintain its safety and reliable operation.
11
