Scheppach HRS250 Traduccion Del Manual De Instrucciones Originales página 16

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling
• Failure to comply with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts,
• Improper use
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
16 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1)
1. Mounting bracket
2. Engine
3. Drum
4. Steel cable
5. Shutdown buffer
6. Automatic stop lever
7. Hook
8. Mounting hole for hooks
9. Emergency stop switch
10. Push-button
11. Control cable
12. Mains cable
13. Deflecting roller
14. Additional hooks
3. Delivery contents (Fig. 2)
A. Wire rope link with control unit
B. Mounting bracket
C. Mounting screws with inserts
D. Additional hooks with guide roller
E. Operating instructions
4. Proper use
• The wire rope hoist may be used only for lifting
and lowering loads according to the device perfor-
mance.
• The machine may be operated only in closed rooms.
• Use the machine only in perfect working condition
and according to its intended purpose, as well as
with adequate consideration of safety aspects and
hazards, in compliance with this operating manu-
al. In particular, rectify malfunctions that could im-
pair safety immediately (or commission rectification
works accordingly)!
• The safety, operating and maintenance specifica-
tions of the manufacturer, as well as the dimensions
specified in the technical data, must be observed.
www.scheppach.com