¢ookln______jg
Control Panel
A
B
...................................
i
C
D
\
\
\
\
_;il
...................
t t
E
F
G
H
The control panel is designed for ease in programming. The displaywindow on the control shows time of day, timer and oven functions.
Control panel shown includes model specific features. (Styling may vary depending on model.)
G!!!!i_ii:i;ill
Broil
Bake
More (A) or
Less (V)
Timer
Cook & Hold
Delay
Clock
Keep Warm
Cancel
Use for broiling and top browning.
Use for baking and roasting.
Enters or changes time, oven
temperature. Sets HI or LO broil.
Sets Timer.
Bakes for a preset time, then holds food
warm for 1 hour.
Programs the oven to start baking at
a later time.
Use to set time-of-day clock.
Use to keep cooked food warm in oven.
Cancels all operations except Timer
and Clock.
Using the Touchpads
Press the desired pad.
Press the A or V pad to enter time or temperature,
• A beep will sound when any pad is touched,
• A double beep will sound if a programming error occurs,
Note:
Four seconds after pressing the A or V pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the A or V pad, the function will be canceled and the
display will return to the previous display.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change
the clock
to
24=hour
format:
1. Press and hold the Cancel and Delay
pads for three seconds.
2. Press A or V pad to select 12 or
24 hour.
3. Set the time of day following the directions below.
To set the Clock:
1. Press the Clock pad.
• Colon flashes in the display.
2. Press A or V pad to set the time of day.
• Colon continues flashing.
3. Press the Clock pad again or wait four
seconds. The colon stops flashing.
When electrical power is supplied or after a power interrup-
tion, the last clock time before power was interrupted will
flash.
To recall the time of day when another time function _s
showing, press the Clock pad.
Clock time cannot be changed when the oven has been
programmed for Delay Cook or Clean, or Cook & Hold.
cont.