Amana AGS1740BDW Guía De Uso Y Cuidado página 19

Idiomas disponibles

Idiomas disponibles

Melntenence
Oven Door
Leveling Legs
To remove:
1. When cool, open the oven door to
the first stop position (opened
about four inches:).
2. Grasp door at each side. Do not
use the door handle to lift door.
3. Lift up evenly until door clears
hinge arms.
To replace:
1. Grasp door at each side.
2. Align slots in the door with the hinge arms on the range.
3. Slide the door down onto the hinge arms until the door is
completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
J
Oven Window
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
Be sure the range is leveled when installed. If
[_
the range is not level, turn the leveling legs,
_11_
located at each corner of the range, until range
I_
level
!i
_iil-71P
BRACKET
\
LEVELING
LEG
Oven Light
(style varies by model)
To replace oven light bulb:
1. When oven iscool, hold bulb cover
BuL_ COVER
in place, then slide wire re-
tainer off cover. Note: Bulb
cover will fall if not held in
place while removing wire
retainer.
REtAiNER
Remove bulb cover and light bulb.
Replace with a 40-watt appliance bulb.
2,
3.
4.
5.
Replace bulb cover and secure with wire retainer.
Reconnect power to range. Reset clock.
OR
1. Use a dry potholder and very carefully unscrew bulb cover
and bulb.
2. Replace with a 40 watt, oven-rated appliance bulb. Bulb
with a brass base is recommended to prevent fusing of
bulb into socket.
3. Replace bulb cover and reconnect power to range.
4. Reset clock.
18
loading