Idiomas disponibles
Idiomas disponibles
PLEASE NOTE
DE
When using both zones with diff erent storage temperatures
EN
the temperature in the upper zone can thus only be lower or
the same as the temperature in the lower zone.
FR
A large diff erence in the temperature settings for each zone
can result in higher energy consumption.
IT
5.2.1 Switching on and off
ES
1.
Plug the power socket into mains power.
NL
2.
The On / Off button fl ashes.
3.
Press the On / Off button.
RUS
4.
The last selected temperature will be shown on the control
panel.
SE
5.
To switch the appliance off , press the On / Off button until
the symbols on the control panel disappear.
PT
5.2.2 Setting the temperature
1.
Turn the appliance on.
2.
The last selected temperature will be shown on the control
panel.
3.
By pressing the two left arrow keys simultaneously, you can
switch between the temperature display in °C and °F.
4.
The selected temperature unit is saved when the corre-
sponding symbol on the control panel stops fl ashing and is
permanently on.
5.
Use the arrow buttons to set the temperature in 1° incre-
ments from 5 °C to 20 °C (41 °F to 68 °F).
6.
The desired temperature will be stored approx. 5 seconds
after the last time you press a button and the symbol on the
control panel stops fl ashing and is permanently on.
7.
The appliance's current temperature is shown.
PLEASE NOTE
Temperature recommendations: Red wine: 12°C – 18°C and
white wine: 6°C – 10°C.
The appliance can achieve the best cooling and consumption
results at a recommended ambient temperature of 16 - 20 °C.
The temperature in the appliance depends on the ambient
temperature, the quantity of bottles and the chosen tempe-
rature.
Please note that your appliance is intended to cool wine.
The maximum temperature which can be achieved inside
the cooler should NOT signifi cantly exceed the ambient
temperature in the room.
5.3 Illumination
5.3.1 Setting the "ECO" mode
If you select the "ECO" mode, then the appliance's interior light
will turn off when the door is shut.
1.
Press the "Light" button.
2.
The "ECO" symbol will appear on the control panel display.
3.
Shut the door.
4.
The LED light will turn off . Next time you open the door, the
light will turn on again.
5.
To deactivate the "ECO" mode, press the "Light" button
again. The LED strips will be permanently on, also when the
door is closed.
PLEASE NOTE
The illumination will switch off after 4 hours to save energy.
5.3.2 Setting light intensity
The light intensity can be set at 4 levels. They are 25 %, 50 %,
75 % and 100 %.
28
CASO WineDeluxe WDU 36
1.
Turn the appliance on.
2.
The LED strips will light up.
3.
Press the "Light" button for a few seconds.
4.
The appliance will briefl y peep once.
5.
Briefl y press the "Light" button again to select the desired
lighting level (L1 - L4).
5.4 How to turn off the sound
To switch off the sound of the appliance, press the right down
arrow and the light key at the same time. You can also use this
button combination to turn the sound back on.
5.5 Wi-Fi control
An app is available to control and programme the appliance
via Wi-Fi. To connect to the appliance simultaneously press the
"Light" and "On / Off " buttons. If you have started the „connec-
tion mode" by mistake, briefl y press the On / Off key. To use the
Wi-Fi mode download the CASO Control app to your smart-
phone or tablet. Visit our website www.casoapp.com/help for
details about the app, the range of functions and instructions
on how to install it.
6 Cleaning and Maintenance
This chapter provides you with important notices with regard to
cleaning and maintaining the device. Please observe the notices
to prevent damages due to cleaning the device incorrectly and to
ensure trouble-free operation.
6.1 Safety information
ATTENTION
Please observe the following safety notices, before you com-
mence with cleaning the device:
Prior to commissioning, clean the appliance thoroughly.
Turn the appliance off prior to cleaning, remove the plug
from the wall socket and remove all the bottles.
Do not clean the appliance with hard, scratchy or abrasive
cleaning agents such as steel wool or the like.
6.2 Cleaning
Interior
Clean the interior surfaces with lukewarm water, a soft cloth and
mild detergent. Use a soft cloth to dry the appliance thoroughly.
Door seal
To keep the appliance running effi ciently, make sure that the door
seal is kept clean. The door seal can be removed for cleaning with
a damp cloth.
Cabinet
The cabinet should be cleaned with a mild detergent and warm
water. Use a soft, damp cloth for drying.
Exhaust vent/ Ventilator
The exhaust vent may become blocked - e.g. by dust - thus impai-
ring the appliance's cooling effi ciency. If necessary, use a vacuum
cleaner to remove any blockage to the exhaust vent.
7 Troubleshooting
This chapter provides you with important notices with regard
to operating the device. Observe the following notices to avoid
dangers and damages.
