Cerwin-Vega CVE Serie Guia De Inicio Rapido página 8

allows you to toggle between a 100 Hz High Pass Filter on the outputs; providing a crossover to top
boxes or leave the output jack's full range.
(C) BLUETOOTH
We have included True Wireless Stereo (TWS) Bluetooth connectivity in the CVE. To PAIR with one
unit push the pair button once. The Blue light will begin flashing and your unit will pop up in your
Bluetooth devices list. To LINK 2 devices together in stereo you push and hold the first unit until it
begins flashing orange. Then push and hold the other unit's button until it flashes orange. After 10
seconds the units will LINK together into a Stereo pair. Once paired you can toggle between STEREO
& MONO by double tapping the pairing button while audio is playing.
Note: you cannot PAIR, UN-PAIR, or LINK units while audio is playing.
(D) INPUT 1 & INPUT 2
These are Balanced Combo Inputs allowing for balanced XLR/TRS LINE levels.
(E) LEVEL KNOB
The LEVEL adjusts the output level of the subwoofers for all channels equally. The Bluetooth level
knob is provided so that you can adjust the level of the Bluetooth signals to match your other inputs
as needed.
(F) OUTPUTS 1 & 2
This connection is designed to provide an output which combines each input channel with the
incoming Bluetooth signal respectively, for connecting to another powered speaker or a recording
device. This output is not affected by changes to the LEVEL knob.
CVE-18s Rear Panel
(A)
This
allows you to toggle between our
2 EQ presets. Listen to each of
these and determine what is best
for you.
LIVE PA - Best used for live music
sound reinforcement, it has a
more balanced deeper low-end
response.
CLUB/DJ - This mode adds
definition and punch to sub
frequencies, it is primarily used
for playback of EDM/Pop/Hip
Hop/etc. music.
(B)
SELECT
This
8
DSP MODE SELECT
mode selection
OUTPUT MODE
mode selection
button
button