Keysight U1731C Guia Del Usuario página 68

3 Setup Options
Setup Menu Summary
The Setup menu items are summarized in the table below. Click the respective
"Learn more" pages for more information on each menu item.
Table 3-2 Setup menu item descriptions
Legend Available settings
Ai, Z, L, C, R, ESR, or DCR
100 Hz, 120 Hz, 1 kHz,
10 kHz, or 100 kHz
D, Q, or θ and P or S
D, Q, or θ and P or S
D, Q, or θ and P or S
FACt or USEr
°
05° to 45
Ft01 to Ft16 or Ur01 to Ur16
H01 to H16 or L01 to L16
0 to 19999
68
Description
Set the measurement type that the LCR meter powers up in.
Default is the auto identification (Ai) mode.
Set the test frequency that the LCR meter powers up in. Default
is 1 kHz.
Set the inductance (L) secondary parameter and measurement
mode that the LCR meter powers up in. Default is quality factor
(Q) and series (S).
Set the capacitance (C) secondary parameter and measurement
mode that the LCR meter powers up in. Default is dissipation
factor (D) and series (S).
Set the resistance (R) secondary parameter and measurement
mode that the LCR meter powers up in. Default is phase angle
(θ) and series (S).
Set the open/short CAL mode that the LCR meter powers up in.
Default is factory (FACt).
Set the phase angle condition for the auto identification (Ai)
°.
mode. Default is 10
Set the limit category (factory or user) and set (01 to 16) that the
LCR meter powers up in. Default is Ft01.
high and low limits for each variable user set. See
Set the
Table 3-4 for the user default values.
on page 80
Keysight U1731C/U1732C/U1733C User's Guide
Learn more on:
page 70
page 72
page 73
page 74
page 75
page 76
page 77
page 79
page 80