Keysight U1731C Guia Del Usuario página 20

1 Introduction
1 Open the battery cover. Lift the tilt stand. Loosen the screw with a suitable
2 Insert the battery. Observe the proper battery polarity. The terminal ends of
3 Close the battery cover. Place the battery cover back in its original position
Figure 1-1
The battery level indicator in the lower right-hand corner of the display indicates
the relative condition of the battery.
the indicator represents.
To avoid false readings, which could lead to possible electric shock or
WARNING
personal injury, replace the battery as soon as the low battery indicator
appears. Do not discharge the battery by shorting the battery or reverse the
battery polarity.
20
Phillips screwdriver and remove the battery cover as shown in
the battery are indicated inside the battery compartment.
and tighten the screw.
Installing the batteries
Table 1-1 describes the various battery levels
Keysight U1731C/U1732C/U1733C User's Guide
Figure 1-1.