Idiomas disponibles
Idiomas disponibles
MASTER BLOCK
1. MAIN OUT[L, R]
These are XLR and TS unbalanced output that output
the mixed stereo signal.
2. SUB OUT
These unbalanced TS output the (SUB 1-2 and 3-4)
signals. Use those jacks to connect to the input of a
multi-track recorder, external mixer, or another similar
device.
3. SEND AUX[1-4]
AUX(1-4) are unbalanced TS, these jacks output
signals from AUX. You use these jacks, for example,
to connect to an external effect device or a
stage/studio monitoring system.
4. RETURN]L/R, R]
These are unbalanced TS jacks. Signal received by
these jacks is sent to the MAIN BUS and AUX 1-4 BUS.
These jacks are typically use to receive return from an
external effect device (reverb, delay...)
5. PHONES
Connect a pair of headphones to this TRS phone jack.
6. RETURN knob
For adjusting the level of the signals sent from the
RETURN input jack [L/R,R] to the stereo BUS.
7. AUX RETURN knob
This section adjusts the levels of the input from the
RETURN jacks, for RETURN L/R and R jacks, the level
of the signals can be sent to AUX1-4 respectively.
AUX[1-4]
For adjusting the level of the signals sent from the
RETURN jack to the AUX1-4. If you are inputting a
stereo signal, the L and R signals are mixed before
moving to the AUX BUSES.
7
