Idiomas disponibles
Idiomas disponibles
BUILT-IN EFFECTS AND MP3 BLOCK
1. DISPLAY
2. PROGRAM knob
To select an effect turn the knob and press
the knob to enable it.
3. AUX1-3 knob
For adjusting the level of the signals sent
from the FX to the AUX 1-3 BUS.
4. FX switch
This button turns the corresponding effect
on or off.
When the fuction is ON the switch lights red.
5. MAIN switch
Turn this switch on to output the signals of
the built-in effect to the MAIN buses.
6. SUB1-2 switch
Turns this switch on to output signals of the
built-in effect to the GROUP 1-2 buses.
SUB3-4 switch
Turns this switch on to output signals of the
built-in effect to the GROUP 3-4 buses.
7. PFL switch
To output the built-in effect signals to the
PFL buses, turn this switch on.
8. FX fader
For adjusting the level of the effect sent
from to built-in effect to the SUB 1-2, 3-4
and MAIN buses.
9. FOOT SW jack
Connect a foot switch to this TS type input
jack.
10. PROGRAM mp3 KNOB
Turn the knob to select the desire music file.
Press the knob to
play/pause/record/confirm the selection.
9
