Idiomas disponibles
Idiomas disponibles
CAUTIONS
Prevention of electric shock
The electrical connection must only be carried out by qualified personal. Before installing, make sure you
use the same power voltage marked in the device (100-240V/50-60Hz). Each device must be properly
grounded and installed in accordance with the relevant standards. Don't use the device in a lightning
storm or wet environment.
To prevent burning of fire
1. Never install the device directly on the surface of ordinary combustible material.
2. The equipment must be installed away from inflammable and explosive materials.
3. Keep at last 0,5 m around the unit for ventilation purposes.
4. Do not replace with non-original spare parts. Contact your MARK dealer.
Unpacking
Note: Before unpacking, check it for possible damage that might have occurred during transportation. If
you find any damage, please do not use the unit and contact the MARK dealer.
13
