Idiomas disponibles
Idiomas disponibles
Important Safety & Usage Information
RPMs increase, the vibrations change concurrently.
PRODUCT RATINGS:
The lift motors are not designed to operate continuously
for more than [2] minutes in an [18] minute time period or
approximately 10% duty cycle. Attempting to circumvent
or exceed this rating will shorten the life expectancy of the
product and may void the warranty. The massage motors
are not designed to operate continuously for more than 30
minutes at a time. Please allow the massaging system to
rest for 30 minutes after automatic massage shut off before
restarting.
MATERIALS
Ergomotion adjustable bases are constructed from various
materials including woods, metals, plastics and fabrics.
Tension, pressure or movement applied to the frame, platform
or shroud through general use may create an audible sound.
THAT "NEW PRODUCT" SMELL:
Some people notice a slight odor to their new adjustable
base—this can come from our material manufacturing process.
This smell is normal and usually disappears before the product
reaches you. Sometimes, however, this smell may still be
noticeable. It usually disappears after a few weeks, providing
adequate ventilation of the product and the environment.
PAIRED OPERATION:
When using synchronized adjustable beds, there may be an
interval of up to 1.5 seconds between the movements of each
bed.
BREAK IN PERIOD:
You can speed up the break-in period by simply spending
time in the adjustable bed through activities such as reading,
watching TV or playing with the kids or grandkids. The extra
movement will help the adjustable base respond to weight and
temperature changes. Some of the materials in our adjustable
bases such as the woods, metals and plastics used in the
platform, frame and components are sensitive to moisture
content and temperature and may make sounds in colder
environments.
WEAR AND TEAR:
Wear and tear is damage that naturally and inevitably occurs
as a result of normal use or aging.
FABRIC CARE:
To prolong the life of your fabric, protect from direct sunlight
whenever possible. For spot cleaning, wipe area with a light
damp sponge or vacuum with a soft brush attachment to
remove particles. Keep at a minimum of 30cm (12 inches)
away from direct heat sources. For a deeper cleaning, blot
liquid spills with a clean dry cloth. Wipe with a clean cloth
dampened with warm water. Do not wet excessively. A soft
bristle brush may be used to remove ingrained soil. Avoid
scratching by gentle brushing. Wipe with a clean cloth
dampened with warm water to remove residues. Dry in shade
away from direct heat. If persistent marks remain visible after
cleaning, seek professional advice.
FCC Compliance:
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
- 6 -
