Idiomas disponibles
Idiomas disponibles
Headboard Bracket Installation (not included)
Headboard Brackets are an optional accessory and are not included.
To purchase headboard bracket components, call customer service.
I)
L)
1
A. Align the hole in the bracket to the brass sleeve
into which the leg threads. Hold the bracket in
place and screw the leg into the base until it
is snug. DO NOT OVERTIGHTEN. Too much
force may cause the leg to spin freely.
B. Align the tab with the hole in the frame
(located towards the foot of the base) and use
a short bolt, washer and wingnut to secure
the bracket. Make sure the bolt is tight.
J)
M)
N)
K)
I)
J)
K)
L)
M) Short Bolts (10)
N) Nuts (18)
2
A. Measure the distance between the mounting
holes on the headboard and install spacer
and attachment plate to accomodate the
headboard.
B. To install the plastic spacer and attachment
plate, you will need (2) long bolts and (2)
nuts. Place the spacer and attachment plate in
the desired location and slip the bolts through
the holes with the head of the bolt facing
outward. Position the bolts diagonally on the
spacer. Use the 9/16" socket and wrench to
tighten the bolts.
You may now connect your headboard to the
3
attachment plate using the remaining short bolts
and nuts to secure it to the brackets. The heads
of the bolts will face outward. Use a 9/16" socket
and 1/2" wrench to tighten the bolts.
- 17 -
Headboard Bracket (2)
T-Bracket (2)
Spacers (2)
Long Bolts (8)
