Focal FLAX EVO P 20 FE Manual De Uso página 15

FLAX EVO
U s e r m a n u a l
To facilitate the Focal-JMlab warranty,
it is now possible to register your product online at: www.focal.com/warranty
Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Thank you for choosing our product and for
sharing our passion for sound and music. These high-tech speaker drivers incorporate enhanced Focal features in speaker
driver design to achieve a powerful, high-quality sound. To get the very best out of your system and to exploit the full
performance of its speaker drivers, we recommend that you read this booklet, then store it in a safe place to refer to in the
future. Any problems caused by failure to follow the instructions may invalidate your guarantee. For optimum results, we
recommend that you have the system installed by a professional.
Package contents (page 3)
First of all, check the space available for fitting the speaker drivers (refer to the plans on the packaging) then proceed with
the cutting required. If mounted in the factory location, check that there is sufficient space between the speaker driver and
the protective grille.
• Keep the speaker drivers clear of any metal shavings and dust particles.
• Clean carefully before mounting the speaker drivers.
The P 20 FE, P 25 FE, P 20 FSE, P 25 FSE and P 30 FSE all boast performances that are capable of reaching high volumes.
Remember: listening to music at a volume higher than 85dB SPL for an extended period of time can cause permanent
damage to your hearing. You are therefore advised to adjust the volume of your equipment to avoid this.
Pre-installation wiring
You will only be able to begin fitting your subwoofer once you have connected it using the dedicated spaces on the product
(fig. 1).
Installation
Please use the screws provided for fixing the subwoofer and to avoid damaging your sub, the trim on your vehicle or any
of its other components (fig. 2).
Product positioning
The speaker drivers in the range have been designed to deliver the most faithful reproduction of the bass in your music.
Nonetheless, a few simple rules should be followed to optimise their performance and to guarantee good tonal balance and
a realistic sound image. Ensure that the woofer is placed inside a suitable enclosure (fig. 7, 8, 9). Ensure that there are no
objects positioned across the protective grille, as this could damage your Flax Evo subwoofer.
SPECIAL PRECAUTIONS
Maintenance
To keep the Flax Evo speaker drivers clean, simply dust using a dry cloth. If the protective grille is marked, we recommend
that you use just a damp cloth. Never use solvents, detergents, alcohol or corrosive products, scrapers or scouring utensils
to clean the surface of the speaker drivers.
Running-in period
The speaker drivers used are complex mechanical components that require a running-in period to operate at their best.
This running-in period varies depending on the conditions in question and may take several weeks. To reduce this time,
we recommend operating your speaker drivers for about 20 hours at a moderate volume. Once the speaker drivers'
characteristics have fully stabilised, you will be able to enjoy the performance of your Flax Evo products to the full.
Conditions of warranty
All Focal loudspeakers are covered by warranty drawn up by the official Focal distributor in your country. Your distributor
can provide all details concerning the conditions of warranty. Warranty cover extends at least to that granted by the legal
warranty in force in the country where the original purchase invoice was issued.
For development purposes, FOCAL-JMLab reserves the right to modify the technical specifications of its products without prior notice.
Non-contractual images.
15 15