Replacing The Cutting Blade - LawnMaster ME1018X Manual Del Usuario

MAINTENANCE
WARNING
Always protect hands by wearing heavy gloves and/or wrapping the cutting edges of the blade with
rags and other material when performing blade maintenance. Failure to heed this warning could
result in serious personal injury.
WARNING
Before performing any maintenance, make sure the mower is unplugged from the power supply.
Failure to heed this warning could result in serious personal injury.

REPLACING THE CUTTING BLADE

NOTE: Only use identical replacement blades.
Wedge a block of wood between the blade and the mower deck in order to prevent the blade
from turning when the nut is being removed.
Place the new blade on the shaft against the fan assembly. Make sure it is installed with the curved
ends pointing up toward the mower deck and not down toward the ground.
NOTE: Make certain all parts are replaced in the exact order in which they were removed.
blade bolt is properly tightened!
NOTE: Only use LawnMaster replacement parts. LawnMaster mower blade replacement part # RMB1018X
WEDGE A BLOCK
BLADE
BOLT
18