Setting Cutting Height - LawnMaster MEC1218E Manual De Uso

ASSEMBLY

SETTING CUTTING HEIGHT

WARNING
Do not at any time make any adjustment to the lawn mower without first stopping the motor and
disconnect the plug form power source.
When shipped, the rear wheels on the mower are set to a low-cutting position. Before using the
mower for the first time, adjust the cutting position to the height best suited for your lawn.
The mower can be set to 6 cutting heights between 1.4" (35mm) and 3.4" (85mm). 6 is the highest setting,
1 is the lowest. Choose the proper cutting height according to the types and conditions of the grass.
To set the cutting height:
To raise the cutting height, grasp the cutting
height adjust ment lever, then move it
toward the back of the mower and engage
the lever in the desired cutting height position
on the mower deck.
To lower the cutting height, grasp the cutting
height adjustment lever, then move it
toward the front of the mower and engage
the lever in the desired cutting height position
on the mower deck.
COLLECTION BAG VIEW WINDOW
The collection bag is equipped with a clear view window through which user can observe the filling
condition during the mowing process.
Empty the collection bag in time when there is a sign that collection bag is full or nearly full by
observing the view window.
EMPTYING
Lift the collection bag by its handle and lift to
remove from mower.
Empty grass clippings.
Lift the safety flap (9) and reinstall the
collection bag as described earlier in this
manual.
(See Fig. 15)
13
(See Fig. 16)
Fig. 16
View Window
16
Fig. 15