Idiomas disponibles
Idiomas disponibles
Procedure for quick checking of the
device
— The device is correctly connected to the vehi-
cle, the "Operating" indicator remains on after
the jump start (see Section „Fremdstarten eines
Fahrzeugmotors").
▸
Check the charging state of the device (see sec-
tion "Checking the charging state").
▸
If the charging state is not sufficient, recharge the
device (see section „Gerät laden").
▸
If the charging state is sufficient, check the fuse.
Replace as necessary.
Note
If after these checks, operation of the de-
vice is still not possible, contact customer
service.
Disposal
Electrical power tools, accessories
and packaging should be sorted
and submitted to an environmental-
ly-sound recycling facility.
Only for EU countries: Do not
dispose of your electric tool with
household waste. In accordance with the European
Directive (EU) 2018/849 on Waste Electrical and
Electronic equipment and its implementation into
national law, electrical tools that are no longer
usable must be collected separately and routed
to an environmentally-friendly recycling/recovery
chain.
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.
Defective
Warranty
15
