Idiomas disponibles
Idiomas disponibles
If the adjustment is
completed, press the
selection knob and con rm
the parameter; Or the
system will con rm the
parameter automatically
after 3 seconds.
Output pulse selection: Press the selection knob . Adjust the selection knob and select the pulse LED
(11 is on); press the selection knob again, the pulse LED (11) is twinkling; It means the output pulse
function can be turned on or turned o . If the display is "ON", the output pulse function is turned on;
if the display is "OFF", the output pulse function is turned o . When the pulse LED (11) is twinkling,
press the selection knob again, the output pulsed conditions transform by "ON" into "OFF" or
transform by "OFF" into "ON". Operation ow as follows:
Step one: 'Welding mode selection switch' select TIG 4T or 2T. Press the selection knob ;
Press the
selection knob
HOT
START
ARC
FORCE
+
SELECTION
SKYTIG 2033
SWEISSWELD.COM
HOT
START
ARC
FORCE
+
SELECTION
SKYTIG 2033
SWEISSWELD.COM
19
SWEISSWELD.COM
TIG ULTRA
pulse
technology
GAS
4T LIFT
MMA
2T LIFT
4T HF
2T HF
Hz
110/220V - 1Ph
TIG ULTRA
pulse
technology
GAS
4T LIFT
MMA
2T LIFT
4T HF
2T HF
Hz
110/220V - 1Ph
Select TIG 4T or 2T
