Idiomas disponibles
Idiomas disponibles
Turbo nozzle (15): With its rotating water jet, the turbo
nozzle (15) is particularly suitable for removing stub-
born dirt.
Washing brush (23):
The washing brush (23) is always used without applying
pressure. It is suitable for cleaning smooth surfaces.
Patio cleaner (24)
The patio cleaner (24) is suitable for cleaning large flat
surfaces outdoors.
Spray bottle (25)
Use the spray bottle (25) to spray cleaning agents that
are permitted for high-pressure cleaners.
11.1 Switching on
m WARNING! Pay attention to the recoil force
caused by the emergent water jet. Ensure that you
have secure footing and hold the spray gun (13) firm-
ly. Otherwise, you could injure yourself or others.
m WARNING! If there are leaks in the water sys-
tem, switch off the product immediately with the
On/Off switch (3) and disconnect the product from
the mains with the mains connection cable. There
is a risk of electric shock! Start connecting the wa-
ter connections again.
NOTE: Do not operate the product with a closed water
tap. Running dry will damage the product.
1.
Ensure that the high-pressure cleaner is switched
off at the On/Off switch (3).
2.
Plug the mains plug into the socket.
3.
Open the water tap fully.
4.
Switch the product on with the On/Off switch (3).
Always switch on the product only after you have
connected all the water lines and they are leak-
tight. The motor switches on until the necessary
pressure is built up. After pressure build-up, the
motor switches off.
5.
Unlock the trigger (17) with the unlocking button (18).
6.
Press the trigger (17) on the spray gun (16). The
product motor starts automatically.
7.
By releasing the trigger (17), the product switches
off, the high pressure in the system is maintained.
11.2 Stop operation
1.
Switch the product off with the On/Off switch (3).
Pull out the mains plug.
26 | GB
2.
Turn off the water tap.
3.
Disconnect the high-pressure cleaner from the
water supply.
4.
Press the trigger (117) of the spray gun (16) to re-
lease the existing pressure in the system.
11.3 Self-priming function
You can also use the product independently of the
water supply (e.g. rain barrel) thanks to the integrated
water suction function. This function can only be used
with a suction hose with filter basket (not included in the
scope of delivery).
m WARNING! The product itself must not be immersed
in the open water source. There is a risk of persons be-
ing injured due to electric shock.
1.
Plug the suction hose with filter basket onto the
water connection coupling (22).
2.
Hang the end with the filter basket into the water
extraction point. Make sure you have a sufficient
water supply and a safe water supply.
NOTE: Running dry will damage the product.
3.
Remove the lance (14) from the spray gun (16).
Press the trigger (17) of the spray gun (16) and
only then switch on the product.
4.
The product starts to draw in water and the air can
escape.
5.
When there is no more air in the product, you can
release the trigger (17) of the spray gun (16). You
can connect the attachment of your choice to the
spray gun (16).
NOTE: The product should not be higher than the
water take-off point.
12. Transport (Fig. 1)
With the bracket handle (1) extended, the product can
be transported comfortably.
13. Cleaning and maintenance
m WARNING! Disconnect the mains plug before any
work on the product. This includes connecting to the
water supply or trying to fix leaks.
There is a risk of electric shock or injury from moving
parts.
13.1 Maintenance
The high-pressure cleaner is maintenance-free.
www.scheppach.com
