Craftsman 316.791650 Manual De Instrucciones página 8

_ ARNING:
To avoid serious personal injury and
damage to the unit, shut the unit off before removing or
installing blower tubes, nozzles, vacuum tubes or the
vacuum bag.
_ WARNING:
To prevent serious personal injury, never
operate the unit without the blower tube firmly installed.
Bumps
Slots Handle
Blower
Outlet
iNSTALLiNG THE BLOWER TUBE AND NOZZLE
Always install the blower tube. The nozzle is optional.
Installing the Blower Tube
1. Align the bumps on the upper end of the blower tube with the
slots on the blower outlet (Fig. 1).
2. Insert the blower tube into the blower outlet (Fig. 1).
3. While holding the handle, twist the blower tube clockwise until it
locks into place (Fig. 1).
Installing the Nozzle
1. Align the slots on the nozzle with the bumps on the lower end of
the blower tube (Fig. 2).
2. Install the nozzle onto the blower tube (Fig. 2).
3. While holding the blower tube, twist the nozzle clockwise until it
locks into place (Fig. 2). The tabs on the blower tube should
align with the tabs on the nozzle (Fig. 3).
Bum
Slot
Fig. 1
Fig. 2
Blower Tube
Blower Tube
Nozzle
Tabs
Tabs
Fig. 3
REMOVING THE BLOWER TUBE AND NOZZLE
Removing the Blower Tube
1. Insert a flat-head screwdriver into the tube lock. Turn the
screwdriver counterclockwise 1/4 turn and hold it in place (Fig. 4).
2. Twist the blower tube counterclockwise until it unlocks from the
blower outlet (Fig. 4).
3. Remove the blower tube from the blower outlet.
Removing the Nozzle
1. While holding the blower tube, twist the nozzle counterclockwise
until it unlocks from the blower tube.
2. Remove the nozzle from the blower tube.
Tube Lock
Fig. 4