Idiomas disponibles
Idiomas disponibles
WARNING!
Under no circumstances should you attempt to
disassemble the main unit and replace the impeller, motor, and battery
by yourself.
CAUTION!
· Excessive heat can damage the battery and reduce the lifespan of your pool vacuum as a result.
· Consult your dealer regarding battery replacement if the following happens:
- Battery does not charge fully.
- Battery operation time is noticeably reduced. Observe and record the run times of the first few
operations (on a full charge). Use these run times as a reference point for comparison with run
times in the future.
· The battery must be removed from the pool vacuum before it is scrapped.
· The battery is to be disposed safely in accordance with local ordinances or regulations.
NOTE: Incorrect maintenance may reduce the battery life and affect its capacity as a result.
Wheel Replacement
NOTE: Replace with a new wheel before the next operation. Unfasten all screws and lift the cover. Take
out the damaged wheel and replace it with a new one. Reverse the steps to install the cover back.
Protective Plug Replacement
WARNING!
Switch off the pool vacuum before replacing the protective plug.
1) Unfasten all screws and lift the round cover. Remove the damaged plug. ATTENTION: Do not move
the switching knob.
2) Align the new plug to the cover and insert either end of the hinge into the slot at first.
3) Use force to insert the other end into the slot.
4) Ensure the hinge is completely inserted into the chamber. Install the round cover back to the unit
and fasten all screws by hand only.
1.
2.
3.
4.
10
