Idiomas disponibles
Idiomas disponibles
PRODUCT INSTALLATION
Installing the bidet attachment (Cont'd)
b. Connect the smaller end of the
braided metal bidet hose to
the remaining open side of the
installed T-Valve.
Step 4b
5. Install adjustable mounting
brackets into the bidet attachment.
a. Push the bracket into the bracket
holder until it snaps into place.
b. Repeat step A to install the other
adjustable mounting bracket.
6. Install bidet attachment on toilet.
a. Place bidet attachment on the
toilet with the nozzle(s) close to
the back of the toilet, leaving a
slight gap between the toilet and
the nozzles. This will vary by toilet.
Step 6a
8
b. Make sure the adjustable brackets
line up with the holes in the toilet
fixture. You may need to rotate the
adjustable brackets accordingly to
line up properly.
Step 6b
c. Replace the toilet seat on top
of bidet attachment and secure
using original toilet seat hardware.
Make sure to tighten so that the
bidet attachment and seat do not
move.
Step 6c
d. Before moving on to the next
step, ensure the handle is in the
"OFF" position to prevent water
from spraying out of the bowl.
