VenenWalker Basic Manual De Instrucciones página 32

EN
PUTTING INTO OPERATION
The device can be operated either with batteries or with the mains adapter
supplied.
• Before use, insert the batteries or connect the mains adapter.
Inserting / Changing Batteries
The battery compartment is on the rear of the control unit. You will need four
1.5 volt AA batteries. Use only standard batteries, never rechargeable batter-
ies!
The demo batteries supplied only have enough power to operate the device
for approx. 20 minutes.
1. Open the battery compartment.
2. Insert four 1.5 volt AA type batteries. Ensure the correct polarity (+/-) when
inserting the batteries.
3. Close the battery compartment.
Your VenenWalker
Connecting the Mains Adapter
32
» basic « is now ready for use!
®
1. Connect the mains adapter to the control unit. The
connection is located below the area for opening
the battery compartment.
2. Connect the mains adapter to a properly installed
socket which corresponds to the technical data of
the device (see the "Technical Data" chapter).
Your VenenWalker » basic « is now ready for use!
®