Idiomas disponibles
Idiomas disponibles
Recovery
(lower) tank
Automatic
shut-off
An automatic
suction
shut-off
is built into the recovery
tank to prevent
the tank from overflowing.
When
the shut-off
activates,
the cleaner
will not pick up
debris
and the sound
of the motor
will change.
The recov-
ery tank is full and must
be emptied.
How to empty
Turn cleaner
off and disconnect
from
electrical
outlet.
Although
not necessary
for satisfactory
performance,
it is
recommended
that the recovery
tank be emptied
after dry
vacuuming
and before wet operation.
Check the solution
tank also. It may need to be refilled
at
this time.
To remove
tank, press down
on release
button
(B) and
pull tank straight
out.
B
Remove
tank lid (C). Empty
tank.
To clean filters
The tank lid contains
a washable,
reusable
filter. Clean this
filter when
suction
is low or reduced.
Turn cleaner
off and
disconnect
from
electrical
outlet.
Q
emove
recovery
tank
and lid (Figs. 24 & 25). Remove
filter lid (A), then remove
filter (B). Remove
loose
debris
from filter by tapping
the filter or gently
brushing
using your
hand.
The filter may also be rinsed
for addition-
al cleaning.
Allow
filter to air dry between
uses.
'A
B
J
J
Continued
-_
11
