Idiomas disponibles
Idiomas disponibles
Note: the term "heavy metals" applies to steels cooper and its alloys. Etc.
Start with shade is too dark to see the weld zone, then go to a lighter shade that o ers a su cient vision
and never go below the minimum.
ISO 16321-2:2021
ISO 16321-1:2021
CSA Z94.3
ANSI Z87.1
AS/NZS 1338.1
AS/NZS 1337.1
EN 175:1997
EN 166:2002
EN 379:2003
PPE regulation (EU) 2016/425
Directive 2001/95/EC
The welding helmets are tested by the following noti ed body:
ESC GmbH
Noti ed Body 1883
Huettfeidstrasse 50
73430 AALEN
Germany
DIN CERTCO
Noti ed Body: 0196
Alboinstrasse 56
12103 Berlin Germany
TUVRheinland UK LTD
Friars Gate (Third oor)
1011 Stratford Road
Shirley, Solihull, B90 4BN
United Kingdom
Approved body number 2571
WARNING
Auto-Darkening welding helmet is designed to protect the welders 'eyes from harmful radiation "Inclu-
ding visible light, ultraviolet radiation (UV)and infra-red radiation (IR) resulting from certain are and gas
welding processes when used in accordance with user instructions."
Ensure that helmet comes properly assembled. However, before it can be used, it must be adjusted to
your personal preferences. Set it up for delay time, sensitivity, and shade number for your application.
(See the table with recommended shade levels).
08
SWEISSWELD.COM
