Idiomas disponibles
Idiomas disponibles
1. BEFORE WELDING
Auto-Darkening welding helmet is designed to protect the welders eyes from harmful radiation
including visible light, ultraviolet radiation (UV) and infra - red radiation ( IR) resulting from certain arc
and gas we ld in g cesses when used in accordance with these User Instructions.
This hood can be used for any type of electric welding: MMA - SMAW / GTAW - TIG / GMAW (MIG – MAG)
/ FCAW (SS – GS) / ARC – AIR (GOUGING – ARC AIR CUTTING) / PAC (PLASMA CUTTING) / MICROPLASMA
/ LASER, with the following ranges of shade: 4-8/9-14 / Auto:7<14
2. PRECAUTIONS
•
Never place the helmet or the ADF on hot surface.
•
Use only at temperature: -5ºC to+55ºC(23ºF-131ºF).
•
Do not immerse the ller in water and protect it from contact with liquid and dirt.
•
The material which may contact the wearer 's skin can cause allergic reaction. Any welding helmet worn
over standard ophthalmic spectacles may transmit impact, thus creating a hazard to the wearers in some
circumstances.
•
Eye protector shall only be used against high-speed particles at room temperature. Automatic welding
l er shall always be used with a backing ocular.
•
Unauthorized modi cations and replacement parts will void the warranty and expose the operator to
the risk of personal injury.
•
If the auto-darkening lter does not darken when they are ignites, stop welding immediately and inspect
the ADF and its power supply. Change if necessary.
•
Do not use any solvents or abrasive cleaning detergent on the ller screen or helmet components.
•
We recommend a usage period of 4 years. The period depends on various factors such as way of use,
cleaning, storage, and maintenance. Frequent inspections and replacement in case of damage are
recommended.
•
Always wear safety glasses or goggles under the welding helmet and protection clothing to protect your
skin from radiation, burns and spatters.
•
Not suitable for driving and road use
•
Protectors that have been subject to impact shall not be used and shall be discarded and replaced.
Make sure to remove any additional protection foil
from both sides of Protection Lens .
01
SWEISSWELD.COM
