Idiomas disponibles
Idiomas disponibles
•
A visual inspection is necessary before every use.
•
If the impact level symbols are not equal on both the lens/ lter and the frame, then it is the lower level
that shall be assigned to the complete protector.
•
The protection marked in accordance with this standard is only provided when all lens and retention
components are installed according to the list or other manufacturer's instructions. This device does not
protect against physical or chemical hazards.
•
If the helmet, or the l er or the cover plate is in any way damaged, they must be immediately replaced.
•
Replace the device after a mechanical impact.
3. STORAGE AND MAINTENANCE
•
When not in use helmet should be stored in a dry place within the temperature from -20ºC to
+70ºC.Remove the battery or tum o the ADF before long-time storage.
•
It is recommended to keep the solar cells of the auto darkening welding ller in the dark or not exposed
to light during storage to maintain power down mode.
•
Welding helmets should not be dropped and do not place any heavy items or tools on or inside the
helmet, which may damage the electro-optical lter.
•
Cleaning can be done with a soft tissue or cloth soaked in mild detergent (or alcohol). Never use
aggressive solvents such as acetone.
•
The user must make daily regular checks to ensure no damage is evident. Outer and inner visors are
worn parts and must be replaced regularly with genuine certi ed universal spare parts.
•
Transport the equipment with original packing box and away from direct sun light.
4. OPERATING INSTRUCTIONS
BEFORE USING
•
Make sure to remove any additional protection foil from both sides of the PC lens.
•
Make sure there is no dust on any sensor.
•
Set the exact mode that you need.
TESTING FUNCTIONS
•
Hold press
, ADF will self-test.
•
Insert battery, ADF will self-test.
POWER
If the battery into is ashing, please change the battery, otherwise operation will not perform well.
02
SWEISSWELD.COM
