Idiomas disponibles
Idiomas disponibles
FAULT
The lter darkening without
are being struck
The lter remains dark after
completing a weld
Slow response
Welding helmet slips
6. TECHNICAL SPECIFICATION
Sensitivity is set too high.
Delay time ís set too long.
Operating temperature is too low.
Headgear is not properly adjusted.
MODEL
CE classi cation
Wiewing area
ADF Light state
Variable shade
Sensitivity
Delay
Memory mode
Sensor
Power supply
External ne tuning
Smart LED light
Auto shade
Auto sensitivity
Auto delay
Auto shade deviation
06
SWEISSWELD.COM
CAUSE
Adjust sensitivity to a required level
Adjust delay time to a required level
Do not use at temperatures below 10°C or
14°F.
Re - adjust the headgear.
STELLAR SERIES
V1
116*81mm (14.6 In.
Shade 3
4 - 8 / 9 - 14
0 - 9 levels
0 - 9 levels (0.04 - 2.0s)
10 records
4 + 1 (ambient light)
Solar cell * 2* lithium batteries
Yes
Yes
shade 7<14
Yes
Yes
±2
SOLUTION
)
2
