GE PGS908 Manual Del Propietário página 35

ge.com(U.S.)
wvvw.GEAppliances.ca (Canada)
Ovenrack
Oven Racks
All oven racks may be cleaned by hand
with an abrasive cleaner or smel wool.
After cleaning, rinse tile racks with clean
wamr and dxT with a clean cloth. Gray
porcelain-coamd oven racks m W remain
in file oven during die self-cleaning cycle
without being damaged. The shin> sih'er-
colored oven racks m W remain in the
oven during the self-cleaning cycle, but
they will lose their luster and become
hard m slide.
It Mll be necessax T to grease M1 oven
rock side edges Mill a light coating of
vegetable oil after cleaning diem by hand
or in file oven. This will help maintain
file ease of sliding file wicks in and
out of the oven.
Socket
/
Glasscover
Oven Light Bulbs
NOTE: The glass cover should be
removed only when cold. Wearing latex
gloves may offer a better grip.
CAUTION... Before replacing your
oven light bulb, disconnect the electrical
power to the oven at the main fuse or
circuit breaker panel.
Be sure to let tlle light cover and bulb
cool completely:
Fox youx safety, do not touch a hot bulb
with bare hands or a damp cloth.
Toremove:
[_ Turn tlle glass cover
counterclockwise 1l/4 mrn until the
robs of the glass cover clear the
grooves of the socket.
[_ Using gloves or a dry clod1, remove
the bulb by pulling it straight out.
Toreplace:
[-_ Use a new 130-volt hMogen bulb,
not to exceed 50 watts.
[_ Using gloves or a dry clod1, remove
the bulb from its packaging. Do not
touch the bulb with bare fingex_.
Receptacle
Usegloves
or cloth
/ )ii(UUU -¸ :?/)/?
%
Push the bulb straight into the
receptacle all the way.
Place tile robs of tile ,glasscover into
the grooves of tile socket. Turn tile
glass cover clockwise 1l/4 turn to
engage.
Fox improved lighting inside
file oven, clean the glass cover
fiequendy using a wet cloth. This
should be done when die oven is
complemly cool.
[_ Reconnect electrical power to
the oven.
35