Idiomas disponibles
Idiomas disponibles
Do not subject the inspection camera to
extreme temperatures or variations in tem-
perature. For example, do not leave it in a
car for extended periods of time. In case of
large variations in temperature, allow the
inspection camera to adjust to the ambient
temperature before putting it into operation.
Starting Operation
Switching On and Off
(Fig. 1)
To switch on the inspection camera, press
the ON/OFF Button 6 or the Center Button
9.
Note: If the Camera Cable 1 is not fitted
when switching on, the Display 5 will show
an error message.
To switch off the inspection camera, press
the ON/OFF Button 6 until the display
switches off.
If no button on the inspection camera is
pressed for a certain time, then the inspec-
tion camera will automatically switch itself
off to preserve battery life. You can set the
switchoff time in the main menu.
Regulating the Illumination Light in
the Camera Head
(Fig. 1)
To regulate the Illumination Light 3, press the
Left-Hand Button 8 or the Right-Hand Button
11 until it reaches the required brightness or
the illumination light has switched off.
• Do not look directly into the Illumina-
tion Light 3 and do not direct the Light
3 onto other people. The light can blind
your eyes.
Zooming In/Out of the Image in the
Display
(Fig. 1)
To set the magnification level on the Display
5, press the Up Button 7 or the Down Button
10 until the required magnification level has
been reached.
Operation
Main Menu
(Fig. 1)
To access the <Main menu>, press the Cen-
ter Button 9.
Navigating in the Menu
(Fig. 1)
• To scroll through a menu, press the Up
Button 7 or the Down Button 10.
• To switch to a submenu, press the Cen-
ter Button 9 or the Right-Hand Button
11.
• To confirm a selected menu option,
press the Center Button 9.
• To switch a function with a virtual
switch on or off
Center Button 9, the Right-Hand Button
11 or the Left-Hand Button 8. This will
also save the setting.
• To return to the previous, higher-level
menu. briefly press the ON/OFF Button
6.
• To exit the main menu and return to
the camera display, briefly press the
ON/OFF Button 6.
Menu Options
(Fig. 1, Fig. 6, Fig. 7)
• <Up Indication>: Switch the function on
or off.
When the Up Indication function is
switched on, the Up Indication Status
Indicator 24 displays, and the arrow of
the Up Indication Direction Indicator 25
shows where "up" is in the image.
Fig. 7
-13-
, either press the
24
25
18
