Idiomas disponibles
Idiomas disponibles
Power Supply
The tool can be operated using a Bosch Li-
ion rechargeable battery.
Operation with Battery Pack
Use only Bosch recharge-
able lithium-ion battery
packs listed in the specifications section of
this manual. Use of other battery packs may
increase the risk of fire, personal injury and
property damage.
Remove
from the tool when not
using it for extended periods. When storing
for extended periods, the batteries can cor-
rode and self-discharge.
Note: The battery pack is supplied partially
charged. To ensure full capacity of the bat-
tery pack, completely charge the battery
pack in the battery charger before using for
the first time.
Use only Bosch chargers
listed in the specifica-
tions section of this manual. Use of other
chargers may increase the risk of fire, per-
sonal injury and property damage.
The lithium-ion battery pack can be charged
at any time without reducing its service life.
Interrupting the charging procedure does
not damage the battery pack.
The lithium-ion battery is protected against
deep discharge by the Electronic Cell Protec-
tion (ECP). A protective circuit switches the
laser level off when the battery is drained.
• Following the automatic shut off of the
tool, do not continue to press the On/
Off button. The battery can be dam-
aged.
Inserting a Battery Pack
(Fig. 2)
If battery release tabs
are cracked or otherwise
damaged, do not insert into tool. Battery
can fall out during operation.
To insert the charged Battery 14, slide it into
the Battery Port 16 until you feel it lock into
position. Do not use force.
Assembly
Removing a Battery Pack
(Fig. 2)
To remove the Battery 14, press the Battery
Release Tabs 17 and pull the Battery 14 out
of the Battery Compartment 15. Do not use
force.
Fig. 2
the
batteries
Battery Charge Indicator
(Fig. 3)
The Battery Charge Indicator 18 on the Dis-
play 5 shows the charging state of the Bat-
tery 14.
Fig. 3
-10-
14
15
16
14
17
17
18
