Seca 651 Instrucciones De Uso página 101

5.11 Transporting device
6 OPERATION
The device is equipped with recessed handles which enable transport over short
distances.
1. Remove the drip guard.
2. Disconnect all the device cable connections (e.g. power supply, network).
3. Raise the device by reaching into the recessed handles.
4. Transport the device to its new setup location.
è Setting up
5. Set up the device
6. Re-establish all cable connections.
7. Install the drip guard.
WARNING!
Injury from falling
► Ensure that the device is steady and level.
► Route connector cables (if present) so that neither users nor the
patient can trip over them.
► Assist people with limited motor skills when they are getting up,
e.g. from a wheelchair.
► Ensure that the patient does not step directly onto or off the edges
of the weighing platform.
► Ensure that the patient steps onto and off the weighing platform
slowly and safely.
WARNING!
Danger of slipping
► Ensure that the weighing platform is dry before the patient steps
onto it.
► Ensure that the patient has dry feet before stepping onto the
weighing platform.
► Ensure that the patient steps onto and off the weighing platform
slowly and safely.
NOTE
The availability of some functions is dependent on device mode. If you
require functions that are not available in the current device mode, ask
your administrator or hospital technician whether the device mode can
be changed.
Recessed handles
device, page 96.
English
Operation • 101