Stihl FS 460 C-M Manual De Instrucciones página 38

English
3
2
Remove the screw (3) from the
N
shutter.
Pull the shutter (2) out of the shroud.
N
Rotate the shutter (2) from the
N
summer position to the winter
position and refit it.
Secure the shutter in position with
N
the screw (3).
At temperatures between
+50 °F (+10 °C) and +70 °F (+20 °C)
The machine can normally be operated
in this temperature range with the
shutter (2) in the summer position.
Change the position of the shutter if
necessary.
36
At temperatures above +70 °F (+20 °C)
2
Always return the shutter (2) to the
N
summer position.
NOTICE
Do not operate the machine in the winter
position at temperatures above
+70 °F (+20 °C) because there is
otherwise a risk of engine running
problems and overheating.
At temperatures below +14 °F ( - 10 °C)
In extreme wintry conditions
Temperatures below
–
+14 °F ( - 10 °C)
Powder or drifting snow
–
it is advisable to use the optional "cover
plate kit".
FS 460
5
FS 490
5
The cover plate kit contains the following
parts for converting the power tool:
4 Cover plate partially blanks off the
slots in the starter housing
5 Air filter with synthetic fabric
element
For FS 460 with tank cap with
–
hinged grip: O-ring for the tank filler
cap
Instructions for converting the
–
machine
After installing the cover plate kit:
Set the shutter (2) to the winter
N
position.
At temperatures above +14 °F ( - 10 °C)
Remove the parts of the cover plate
N
kit and refit the standard parts for
summer operation.
FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L
2
4
2
4