Stihl FS 460 C-M Manual De Instrucciones página 23

Fold the grip of the wing screw down
N
so that it is flush.
Mounting the Control Handle
Take out the screw (11) and remove
N
the nut (12) from the control
handle (1).
1
Pass the control handle (1) under
N
the drive tube and put it down on the
right-hand side of the machine.
FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L
Swing the control handle (1) behind
N
the handlebar so that the throttle
trigger (13) is facing up.
14
11
1
12
Push the control handle (1) in this
N
position onto the end of the
handlebar (2) until the holes (14)
are in alignment – the throttle
trigger (13) points up.
12
11
Fit the nut (12) in the control
N
handle (1), insert the screw (11)
and tighten it down firmly.
13
1
13
2
14
1
1
Adjusting the Handlebar
Opening the wing screw
Raise the grip of the wing screw to
N
the upright position.
Turn the wing screw
N
counterclockwise until the handle
support can be moved.
Line up the handlebar
Move the handlebar to the required
N
position.
English
21