Idiomas disponibles
Idiomas disponibles
Display and Bu ons Instructions
When using the electric tangle-free brush bar, electric mite brush, crevice
nozzle, or brush nozzle, the vacuum cleaner uses the Auto Mode as the default,
and the Auto Mode will show on the display.
Status Indicator
Ba ery Level Indicator
• Green: Ba ery level > 20%
• Red: Ba ery level ≤ 20%
Auto
Lock Bu on
• Press to switch between Non-continuous Mode
Suction Level/Language Bu on
• Press to cycle through the vacuum cleaner's
• Press and hold for 3 seconds to enter the
Working Modes
Non-continuous Mode
Hold down the power bu on to start the vacuum cleaner,
then release to stop it.
Continuous Mode
Press the bu on
to switch to Continuous Mode. Press
the power bu on of the vacuum cleaner, it will work
continuously; press the power bu on again, it will stop
working.
and Continuous Mode.
suction levels of Eco, Auto, and Turbo.
language setup, and then press to switch
the language. To use the selected language,
press and hold the bu on for 3 seconds or no
operation for 5 seconds.
Care & Maintenance
Precautions:
• Always use genuine parts to ensure normal operation and to keep your
warranty valid.
• If any rotating part becomes stuck, the vacuum cleaner may shut off
automatically. Remove any trapped foreign objects, then resume use.
• Before cleaning, remove the brush head from the vacuum cleaner to prevent
accidentally turning on the vacuum cleaner, which can cause injury.
• If the vacuum cleaner will not be used for an extended period, fully charge
it and disconnect it from the power then store it in a cool, low-humidity
environment away from direct sunlight.
• To avoid over-discharging the ba ery, recharge the vacuum cleaner at least
once every three months.
Cleaning the Vacuum Cleaner
Wipe the vacuum cleaner with a so , dry cloth.
9
