Franke FMA 8381 HI Manual De Uso página 30

E6
Hob does not switch on.
E8
Cooking areas are turned
off.
E4-E5-E7-E9-ER20-
Disconnect the hob from the power supply.
ER22-ER31-ER36-
Wait a few seconds, then reconnect the hob to the power supply.
ER47-EA-EH
If the problem persists, call the After Sales Service and specify the error code that appears on the dis-
play.
17. MAINTENANCE -
REPAIR AND
CONFORMITY
• Make sure that maintenance on elec-
trical components is only carried out
by the manufacturer or by the service
technicians.
• Make sure that damaged cables are
only replaced by the manufacturer or
by the service technicians.
When contacting the service depart-
ment, please provide the following in-
formation:
• Type of fault
• Device model (Art./Cod.)
• Serial number (S.N.)
This information can be found on the
identification plate. The identification
plate is affixed to the bottom of the
device.
Information on the product pursuant
to EU regulation no. 66/2014
Reference standards:
EN/IEC 60350-2
EN/IEC 50564
This appliance has been designed,
manufactured and sold in compliance
with the EEC directives.
18. TECHNICAL DATA
Product identification
Type: 4300
Model: FMA 8381 HI
30
Power supply voltage and/or fre-
quency is out of range.
Fan fault.
Fan blocked by dust or fibres.
Please see the identification plate af-
fixed to the bottom of the product.
The manufacturer makes continual im-
provements
reason, the text and illustrations in these
instructions for use may change without
warning.
Further information on the technical
data is available on the website:
www.franke.com
Total maximum power (hob and
Total maximum power (hob and
Total maximum power (hob and
Total maximum power (hob and
1,2 Flexible cooking area 1 + 2 In bridge
3,4 Flexible cooking area
Parameter
Working dimensions
Check mains voltage and/or fre-
quency.
If necessary, contact the After-Sales
Service.
Clean and remove foreign bodies
from the fan.
If the error persists, please contact
the After-Sales Service.
to
products.
MODEL
hood)
hood)
hood)
hood)
Value
-
For
this
FMA 8381 HI
7.62 Kw (basic setting)
4.72 Kw
3.72 Kw
3.02 Kw
Dimensions
(mm)
830 × 520 (W x
D)
loading