Idiomas disponibles
Idiomas disponibles
Specifications and Functions
1. Power supply
DC6V, 4 AA, 1.5V Alkaline batteries. (not included)
2. Low battery indication
2-1 During operation, if the red light on the battery cover blinks and 10 short beeps
are heard, it means that the battery is low. The batteries need to be replaced
immediately.
2-2 All settings will remain active and won't change or disappear even if the battery is
down.
2-3 When the batteries are fully drained, the system can still be locked or unlocked
manually with the key.
3. Keypad light indication
If the password is entered incorrectly more than 5 times, the system will initiate its
protective mode and stop functioning.
4. Audio indication
4-1 1 short beep means the operation is normal.
4-2 2 long beeps mean the setting is correct.
4-3 3 short beeps mean operational error.
4-4 3 long beeps mean the default password has been restored.
4-5 5 short beeps mean password operational error. The system will initiate the
protective mode and stop functioning.
4-6 10 short beeps mean the battery is low.
5. Programming Code (PC)
5-1 The default programming code is "0000". It is recommended that the user change
the programming code during initial installation.
5-2 There is only one programming code and is used to set all functions.
5-3 The programming code cannot be used to unlock the door.
5-4 The programming code must be 4-10 digits in length.
5-5 The programming code can be changed anytime as needed.
8
