Idiomas disponibles
Idiomas disponibles
Change Lever Handing
a. Make sure that the lock is unlocked. (The
spindle is perpendicular.) Remove the protection
sleeve of the exterior lock unit. Rotate the
exterior lever by 180 degrees and return the
protection sleeve to its original position.
b. Insert the dismantle tool into the hole on the neck
of the exterior lever and press down, and pull
the lever out at the same time. From the interior,
just remove the lever and switch the interior and
exterior levers.
c. Push in and fasten the lever. Make sure that the
lever is correctly in place, and test the lock by
turning it to make sure it's functioning properly.
b
Exterior lever
5
Remove the interior lever
Use the thumb and index finger to push against
the lock body while holding and pulling the lever
back. Meanwhile, insert the dismantle tool into the
hole on the side of the lever, press down, and the
lever can be pulled out.
Protection
sleeve
3
4
a
2
c
6
Interior lever
2
1
Protection
sleeve
Exterior lever
1
3
