Idiomas disponibles
Idiomas disponibles
Pocket Digital Multimeter / English
CAUTIONS
• Improper use of this meter can cause damage, shock, injury or death. Read and
understand this user manual before operating the meter.
• Always remove the test leads before replacing the battery.
• Inspect the condition of the test leads and the meter itself for any damage before
operating the meter. Repair or replace any damage before use.
• Use great care when making measurements if the voltages are greater than 25VAC
rms or 35VDC. These voltages are considered a shock hazard.
• Always remove power from the device under test before performing Diode, Resistance
or Continuity tests.
• Voltage checks on electrical outlets can be difficult and misleading because of the
uncertainty of connection to the recessed electrical contacts. Other means should be
used to ensure that the terminals are not "live".
• If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Input Limits
Function
A AC, A DC
V DC, V AC
Frequency
Resistance, Diode Test
2
Maximum Input
100A AC/DC
600V AC/DC
250V AC/DC
250V AC/DC
3. DESCRIPTION
3-1 Meter Description
1. V and COM jack
2. LCD display
2
3. Current fork
4. MODE button
3
5. Data Hold button
4
6. Rotary Function swith
7
7. DC ZERO Rotary
8. Battery Cover
3-2 Display icons Description
V
Volts
A
Amperes
F
Farads(Capacitance)
AC
Alternating Voltage and Current
DC
Direct Voltage and Current
Minus sign
Ω
Ohms
Continuity
Diode test
-9
n
nano (10
)
-6
μ
micro (10
)
-3
m
milli (10
)
3
k
kilo (10
)
M
6
mega (10
)
OL
Overload
Low battery
Pocket Digital Multimeter / English
1
5
6
8
AUTO
Auto ranging
H
Data Hold
Hz
Hertz (frequency)
%
Percent (duty ratio)
Auto power off
o
C
Degree Celsius
o
F
Degree Fahrenheit
3
