Control Panel And Operation - Klarstein ICE GALET Manual De Instrucciones

EN
24

CONTROL PANEL AND OPERATION

Plug in the power cord; the POWER indicator will light up. You can operate the
machine by touching the buttons on the control panel as shown below. The main
functions are: ICE, CLEAN and LIGHT.
CLEAN button
If you are using the device for the first time or have not used it for a long time, you
should clean it first.
• Before the cleaning process, check the drain pipe behind the unit and make
sure the water drain cap is inserted into the drain pipe; otherwise the device
will not function properly.
• Press the CLEAN button. The symbol
flashes, the cleaning process runs for at least 20 minutes, then the symbol
goes out. Press this button again to stop cleaning.
lights up, 5 seconds later the symbol