Idiomas disponibles
Idiomas disponibles
• Drain hole: Check the drain hole regularly to make sure it is clear and clean it if
necessary to prevent clogging and leaks.
• Condenser: Accumulation of dust at the condenser increases energy
consumption. Therefore, carefully clean the condenser at the back of the product
once a year with a soft brush or a vacuum cleaner.
6. STORAGE
• If the product is not used for a long time, unplug it, clean the product and let it
dry.
• Leave the door open to prevent mold growth.
• Store the product in a dry, clean place, not in extremely high or low temperatures.
7. DISPOSAL AND RECYCLE
Think about the environment and contribute to a cleaner living environment! You
can contact your local council for all information on disposal options for discarded
products.
Note
◊ This product does not contain ozone-depleting gases, either in the cooling circuit
or in the insulation materials. The insulation foam contains flammable gases: the
product must be disposed of according to the regulations of the local authorities.
Avoid damaging the cooling unit, especially the heat exchanger.
Caution: Choking hazard and electric shock hazard.
◊ Before discarding, unplug and cut the power cord close to the appliance.
◊ Remove the door to prevent children from locking themselves in the product.
7.1 Disposal
At the end of its life, do not dispose of the product with normal
household waste, but hand it in at a government designated collection
point for recycling.
Dispose of the packaging and accessories in accordance with the
environmental regulations in force in your local council. Pay attention
to the symbols on the different packaging materials and - if necessary
- dispose of them separately. The packaging materials are marked with
letters and numbers: 1-7: plastic, 20-22: paper and cardboard, 80-98
composite materials.
English
39
